Show simple item record

dc.contributor.advisorLaubscer, P.J.
dc.contributor.authorFourie, Hanlie
dc.descriptionThesis (M.Sc. (Occupational Hygiene))--North-West University, Potchefstroom Campus, 2007.
dc.description.abstractBackground: Tailings dam workers are exposed to tailings dust that has a potential health risk due to the element contents in the dust. The extent of exposure of tailings dam workers is unknown. Consequently, the elements, level of exposure, the potential adverse effects to health, compliance to legislative requirements and the efficiency of the current control measures were investigated. Design and Method: During the trials, 69 personal dust samples were collected during three full production shifts from tailings dam workers in three different tailings dam environments. The field filters were weighed to calculate the total dust concentrations. Bulk samples and field filters were analysed using the 32-element and particle size distribution scans. The between-dam, between-days and between-group variances were determined to assess the changes in exposure levels. Results: The tailings dam workers were not overexposed to tailings dust. Mean exposures were below the OEL for PNOC, measuring 0,124 mg/m3 (TD 1) 0,366 mg/m3 (TD 2) and 2,956 mg/m3 (TD 3). Three outliers in the data were present in TD 3 and exceeded the action level for PNOC. A major part of the particle size distribution consisted of inhalable sizes (>I0 μm). Cyclone tailings dams have smaller particle sizes than spigot tailings dams, though 85% of the particles in all tailings dams were larger than 10 μm. Some elements identified in the dust have potential respiratory health effects. No significant differences existed between the three tailings dams regarding tailings dust concentrations (p=0,527 on 5% significant level and p=0,292 on 10% significant level). There was, however, a significant difference on a 5% significant level between the days (p=0,003 and p=0,006). The workers on the cyclone tailings dams had smaller exposures than workers on the spigot tailings dams, and the pipeline labourers were more exposed than the mudguards. The tailings dams did comply with legislative control measures. However, washing facilities for the cleaning of overalls due to elements in the dust, such as nickel, chromium and manganese need to be considered. Workers need to be educated in work practices and procedures, personal hygiene and symptoms that can be experienced after exposure. Engineering control measures such as water sprayers covering the entire tailings dam, the use of fixed or temporary windscreens in the area where work is done and covering of the roads on the tailings dam with gravel or water spray can be considered as dust suppressant controls. Conclusion: The study met the issues set out in chapter 1, hypotheses were rejected and accepted and future studies were suggested.
dc.publisherNorth-West University
dc.subjectTailings dusten
dc.subjectParticle sizeen
dc.subjectBetween-dams exposureen
dc.subjectBetween-days exposureen
dc.subjectBetween-groups exposureen
dc.titleExposure to tailings dust, the characterization thereof and the evaluation of current control measuresen

Files in this item


This item appears in the following Collection(s)

  • ETD@PUK [7480]
    This collection contains the original digitized versions of research conducted at the North-West University (Potchefstroom Campus)

Show simple item record